Newton Airlines

1. Flight Control Board Assembly - Take care when soldering. Look for solder bridges, reverse polarity connections and bent pins. Check volt...

  4 rubber pads and 8 screws / bolts to remove the back  2 x Patch antennas No ratchet spring on the throttle

The two G and two 9V wires from the VTx can be combined into one G and one 9V for the FC HD FPV UART input. Tx and Rx wires from the camera ...

  Roughly scaled 30% dimensions of the 2m CORVO Video of my version with 185mm chord -  https://www.youtube.com/watch?v=hL1W1PqLMDw

 Here is how I arrange my HD FPV OSD for DJI and Walksnail Avatar gear and ELRS RC link DJI Vista / Runcam Link / Caddx Air Unit.  OSD overl...

Here are some suggestions for the best beginners RC and FPV gear in 2025. I am recommending radios with  EdgeTX operating system and Expres...

Here are my settings for GyroFlow with the Caddx Walksnail Moonlight @ 4K 30FPS on a Finwing XBird. Using Gyroflow 1.5.4 because 1.6.0 didn...