Probably no longer available, but anything similar would be OK with most analog FPV cameras.
Search This Blog
Wednesday, 11 November 2026
Analog VTX - Eachine TS5823L
Saturday, 11 January 2025
Beginners RC and FPV gear for 2025
Here are some suggestions for the best beginners RC and FPV gear in 2025.
I am recommending radios with EdgeTX operating system and ExpressLRS RF link for the best future proofing. This gear will be suitable for beginners and basic models right through to advanced users.
ExpressLRS has now matured enough to be a reliable RC link system with superior range and link security. I would recommend using an ELRS radio with ELRS receivers, then adding an external 4in1 Multiprotocol Module for non-ELRS receivers.
RC Gear
Transmitters
The Pocket is the cheapest and smallest radio but has all the functions and range of much more expensive systems. It has two 3 pos switches, a latching button, two momentary buttons and a slider on the top right.The antenna is fixed but able to rotate and fold away.
The screen is quite small which might be a problem for aging eyes.
Maximum output power of 250mW gives range of several km.
Output power of 1W gives range of tens of km.
Radiomaster ER PWM receiver range
The ER ELRS receivers have PWM pins for each channel and are designed to operate servos directly.
Range of several km is possible with the Pocket and Boxer radios.
4, 6 and 8ch receivers are available, some with a barometer for vario feedback and battery monitoring.
Radiomaster RP serial receiver range
The RP ELRS Serial receivers are designed for use with Flight Control Boards where a serial connection is required.
Serial connection means all 16 channels are sent down one wire.
Analog FPV Gear
The following gear is all standard definition analog because it is much cheaper than Digital HD. It is best to learn FPV using the cheaper analog systems then step up to digital later.
Goggles / Screen
The dual screen goggles like Skyzone or Fatshark are too expensive for beginners and it's best to save your money for future digital goggles purchase.
Eachine EV800D single screen gogglesThese are a good compromise between cost and features. The screen can be detached from the goggles and used just as a screen. It has built in DVR recording and dual antennas.
FPV cameras
Runcam Phoenix 2This is my favourite analog FPV camera with 4:3 and 16:9 aspect ratio and great picture quality. The lens has a nice wide angle view.
There are many other camera options and anything similar will work for FPV as long as you pay attention to the required input voltage. Some cameras can only handle 5V and others can handle a wider range.
I prefer 16:9 aspect ratio and a wide angle lens (2.1 - 2.5mm) for use on fixed wing models.
Video Transmitters (VTx)
There are so many options for VTx that it's hard to narrow down the choice.I would avoid the ultra high power VTx. More than 1W power is just not necessary for normal FPV.
Anything with 1W or less is all you need for a few km of range. More range is best achieved with a high mounted directional receiver antenna, rather than pumping out more power.
You may also need to buy an antenna for the VTx. Take note of the antenna connection style such as SMA, RP-SMA, MMCX, uFL.
Here are some suggestions
All-In-One units (AIO)
The cheapest and easiest entry to FPV is to use an AIO camera and VTx
They are not the best quality or range but you just have to supply power (usually 5V) and find the channel in your goggles.
They can also be easily swapped from model to model.
HD video cameras
For high quality onboard video recording here are some great options.
Runcam Thumb 1080 and Thumb Pro 4kThe Thumb cameras are small and light weight but can record excellent video. They don't have an internal battery and require 5V input to operate. This can come from the receiver or another 5V source.
They have a gyro built in and can record a motion data file to be used for Gyroflow stabilised video.
Runcam 2 4k
Has a removable battery, so power from the model is not required. If you remove the battery and connect to the VTx it can also be used as an analog FPV camera as well as 4k HD recorder.Sunday, 22 September 2019
Best Cheap FPV gear
All In One camera and Video transmitter (AIO)These camera / VTx combos are the simplest way to convert a plane to FPV. They are light and inexpensive and easy to swap from plane to plane.
The down sides are:
- The camera will not be the best quality, with lower dynamic range and large fisheye distortion.
- The range may not be as great as a more expensive Video Transmitter.
AOI VTx power output ranges from 25m to 200mW, giving range of maybe 100m up to many hundreds of meters.
- Voltage input is usually 3.5 to 5V. This means you cant run them straight from your flight battery. Best option for cleanest FPV video is to use a separate 1S battery for the FPV, or you can run it from the receiver or BEC.
Eachine TX02 200mW is my current recommendation - Eachine TX02 Banggood
FPV Goggles / screen
- Proper two screen goggles like Fatsharks, Skyzones and Aomway Commanders are very expensive, so I'll discount them for this discussion.
- Single screen box goggles are much cheaper but will not suit everyone. I need +1.0 close-up glasses for reading and I find that I cannot focus on the screen with most box goggles. I have modded some by glueing close-up lenses into the box enclosure.
- FPV screens by themselves can be a good solution but they are often more expensive than the box goggles.
Eachine EV800 goggles combine a detachable screen with goggles mount, so I think these are the best cheap option. The screen part can be mounted on a tripod or directly on your transmitter, and it includes the video receiver, battery and antenna. They also come with good quality antennas.
Eachine EV800 is the cheapest option with single clover leaf antenna - Eachine EV800 Banggood
Eachine EV800D has clover leaf and patch antennas for greater range, and a DVR for recording the FPV feed - Eachine EV800D Banggood
Sunday, 4 February 2018
My FPV gear
I strongly recommend trying goggles on before you buy. They must suit your vision, Inter Pupilary Distance IPD and the shape of your face. Idealy I would like a bit more IPD and focus adjustment to suit my vision and big head. For normal reading I need +1.0 diopter glasses.
My goggles are Aomway Commander V1S goggles Much cheaper than FatSharks but with a decent quality 16:9 picture and DVR recording. Supplied with excellent patch and cloverleaf antennas and the diversity receivers give great range. Range of 3km on 200mW is possible in perfect conditions.
In the single screen goggles I like the Headplay SE box.
I needed to fit the included RHO narrower view lenses to see the screen clearly.
Spectacular viewing experience but limited by the lack of diversity receivers. Supplied with an add-on DVR unit

My preferred antennas are 5.8GHz Right handed circular polarised Aomway clover leaf
They come in SMA or RP-SMA connector style, and you need to choose the correct style to match your goggles and video transmitter. SMA antennas have a prong, RP-SMA have a hole.

My preferred Video transmitter (VTx) is the TS5823L Eachine 200mW 40ch TS5823L
It is compact and has a single push button to select channels and a single digit LED display.
The wires are stiff and delicate so need to be handled carefully.
There is a TS5823S version with a 5V regulator onboard, but I found this produced diagonal lines in the FPV feed.
Antenna connector is RP-SMA
Video transmitters come in a variety of power ratings.
25mW for small park flying and racing
200mW for general FPV
600mW for longer range, but be aware this will cause more interference to others. Only use if no-one else is flying FPV nearby.
VTx connection
I solder on a female servo-style connector to the Red, Black and Yellow wires for Power, Ground and Video signal. The other two wires are for Audio which I don't use.

I like a dedicated FPV camera like the Runcam Sparrow or Eagle 2 Pro. They are both swappable from 16:9 to 4:3 aspect ratio and have wide dynamic range and battery voltage displayed on screen.
My latest favourite camera is the Runcam Phoenix 2. It's a lot smaller and cheaper than the Eagle but with great image quality. It doesn't have OSD voltage.
It is possible to use the TV out signal from an HD camera like a Mobius or GoPro, but it is not as safe as a stand alone FPV camera. Any issues with the HD camera recording or battery could interfere with your FPV view.
More information on that here - Other FPV cameras
To connect the camera to the VTx I solder on a male servo-style connector to the +V, Ground and Yellow. If the camera also has Voltage display capability I connect the Voltage sensor wire to directly to the Red +V wire so I can see the flight battery voltage on screen.
This compact FPV backpack can be mounted with tape or velcro on to any plane.
All of this gear is available from Banggood via the links above, and these category links
BANGGOOD website
BANGGOOD RC
Friday, 26 January 2018
Aomway Commander V1 Head tracker module
The Commander V1 Advanced version comes with the head tracker installed. I have the non advanced version so needed to buy and install the module myself.
I purchased it direct from Aomway www.aomway.com and it came with the trainer cable, ribbon cable, mounting screws and spare push buttons. They don't actually have an online shop but send an email to "Sales" to enquire about purchasing.
I also bought a replacement DVR ribbon cable to replace the cable I had previously damaged. They are quite delicate and you must be very careful not to jam the cables when reassembling the case.
Thursday, 20 July 2017
What FPV cameras do I use?
Here is a playlist of all my FPV reviews - Youtube link
FPV Cameras
There are so many options these days with Foxeer and Runcam competing almost weekly with new dedicated FPV cameras, and most action cams offering FPV or TV Out as well.
It's important to note that our analogue video transmitters only send standard definition video. The picture quality is not great compared to even the most basic Action cam recording. High definition digital video transmitters are now being released, but they are still bulky and expensive.
You can use dedicated FPV cameras or Action cams for FPV, but it's probably safer to use a dedicated FPV camera because Action cams can shut down or freeze with low battery or insufficient storage space. Dedicated FPV cameras tend to have much less delay or latency in the video feed than action cams as well, which is important for control at high speed. FPV cameras are usually 4:3 aspect ratio and Action cams are 16:9.Dedicated FPV cameras
These are really just fancy security cameras, mostly with CCD sensors but a few with CMOS sensors. They usually have screw mounted lenses ranging through 2.8mm, 2.5mm and 2.1mm. I prefer the widest view of a 2.1mm lens and these can be purchased from places like Banggood for a few dollars.
Either the sensor or the lens will have an Infra Red filter fitted. In most cases the IR filter is on the sensor so you would buy a lens without the IR filter. Most are 4:3 aspect ratio and standard definition. 16:9 aspect ratio cameras are becoming available. If the option is available it is a good idea to turn on High Dynamic Range or DHDR in the camera setup to give the best video feed in difficult lighting conditions.
Surveilzone, Foxeer and Runcam HS1177
This is the first FPC cam I bought, mainly for it's small low drag casing. It turned out to be the most commonly used FPV camera in the RC community. It has a 4:3 600TVL CCD sensor which handles light and dark areas better than the cheap CMOS cameras.
Here is a review of the Runcam PZ0420M and Foxeer HS1177
These are the latest high quality 4:3 aspect ratio FPV cameras and are currently the most commonly used in the RC community. They have evolved from the early HS1177 to offer excellent HDR and On Screen Display of flight battery voltage, pilot name and flight time. This is a fantastic development meaning you don't need a separate system for OSD to keep track of your battery voltage. However you do need to connect an extra wire from the battery + lead to the camera.See my FPV playlist for reviews.
This is a smaller version of the Runcam Swift without the OSD, designed for mounting in smaller spaces.Sunday, 22 January 2017
Eachine VR D2 FPV goggles
BANGGOOD purchase link
Here are the recorded video sizes with examples, and the review video with some flight footage.
(Images are not exact scaled sizes - limited by Blogger image display options)
Sunday, 2 October 2016
Boscam RX LCD5812 FPV screen review
Removable sunshade folds down to protect the screen in transit.
AV in and out, HDMI in, USB port for firmware updates. External power port.
The only downside is that it doesn't have a built in DVR.
GEARBEST purchase link
Wednesday, 12 November 2014
1.65m (65") Twin Boom pusher
![]() |
| 1.3m Depron Spectre and 1.65m Twin Boom pusher |
![]() |
Instead of using packing tape to cover the depron I used document laminating film, often referred to as New Stuff in the RC world. It is ironed on with a warm iron before bending the airfoil and fuselage, and works very well. It's tougher and easier to apply than packing tape.
Construction
See the depron wing build and Spectre overview videos for the basics, and the Spectre post on this blog.
Additional strengthening ...
6x1mm CF strip glued along the front of the elevator.















